Name: How To Install a Dashcam - The New d'Action 360S DC5000
Uploaded: 2020-04-24T09:05:04.172887+00:00
Duration: 1163 s
Channel: GTChannel
Description: We unbox, install and review the new d'Action (Carmate) 360S DC5000 dashcam.

GTChannel

Fat Chili Preroll

Razo DC5000A d’Action 360S Dash Camera 

We unbox, install and review the new d'Action (Carmate) 360S DC5000 dashcam. 

<p>We unbox, install and review the new d'Action (Carmate) 360S DC5000 dashcam. </p>

https://d3ev5earl6dvd0.cloudfront.net/public-media/videos/000/182/000182/video.mp4

Open the side door of the camera and click the SD card all the way in.

Install the SD Card

Remove the lock button and drop the battery door out of the way.

Remove Battery Door

On the dashcam, line the notches on the adapter and camera up and insert adapter into place (the lever on the side exposing the notch means it's secured) in place. Engage the blue lock switch on the bottom of camera. .

Install Battery Adapter

Line up mount notch to the side of the dashcam, insert, and lock in (screwing clockwise).

Install Car Mount

Don't mount the camera too high or too low, making sure the rear-view mirror and sun visor don't block the view. Adjust location to your preference.

Find a good clear spot

Remove the 3M masking and adhere camera onto windshield. .

Stick the Mount to the Windshield

Take the allen key and re-adjust the angle of the camera as needed.

Adjust camera as needed

Locate the USB port on the camera and connect the cable.

Connect USB cable to camera

Position the cable out of the way as much as possible. Limit the amount of slack. Use hook attachments as needed.

Route cable towards power source

Plug the adapter into charging port, followed by plugging the cable into the adapter.

Plug cable and adapter into power source

Find the d'Action 360S app in your app store.

Download the 360S App

Go into your mobile settings and connect to the WiFi of the camera. Open the app and get familiar with the camera settings and features.

Connect to Camera via WiFi

With the optional parking unit, strip the yellow cable end and connect yellow cable to the Positive terminal of your car battery.

Connect battery-connecting cable 

Attach cable to anywhere that has a grounding point.

Connect Ground to a metal grounding point

Strip the blue accessory cable end and connect to your 12V accessory port.

Connect blue cable to 12V source

Unplug the USB port from the power source. Locate the USB port on the DC201 unit and plug the cable in.

Plug USB cable into DC201 unit

Adjust to the correct voltage accordingly and turn on power. Attach unit in a secure location.

Adjust voltage

For the DC101 optional battery unit installation, begin by rmeoving the power adapter.

Related Videos