Name: How To Install a Performance Oil Cooler Kit
Uploaded: 2020-04-24T20:31:22.142993+00:00
Duration: 391 s
Channel: GTChannel
Description: Mishimoto, the world leader in performance cooling products, shows you how to install the Direct Fit Oil Cooler Kit for the Mitsubishi Lancer Evolution 7/8/9!

GTChannel

Mishimoto, the world leader in performance cooling products, shows you how to install the Direct Fit Oil Cooler Kit for the Mitsubishi Lancer Evolution 7/8/9!

<p>Mishimoto, the world leader in performance cooling products, shows you how to install the Direct Fit Oil Cooler Kit for the Mitsubishi Lancer Evolution 7/8/9!</p>

https://d3ev5earl6dvd0.cloudfront.net/public-media/videos/000/424/000424/video.mp4

Jack up the car and secure it on jack stands.

Place Car on Jack Stands

Disconnect the bumper from the fender well splash guard by removing the two pop clips and single 10 mm bolt from each side of the car.
.

Disconnect bumper

Pull back on the fender well splash guard and pull down on the bumper to unclip it.

Unclip front bumper

Remove the two 10 mm bolts hidden behind the covers on the front of the bumper. These covers are located just above the fog light housings.

Unbolt front of bumper

Open the vehicle hood 

Remove the four pop clips from the top of the bumper above the grille.

Remove pop clips

Remove the two 10 mm bolts that hold the front bumper to the
upper radiator support. .

Unbolt bumper from upper radiator

Remove front bumper

Install the mounting brackets to the cooler using the supplied hardware.

Install mounting brackets on cooler

Remove the oil filter according to your product's specs.

Remove the oil filter

Unbolt the oil lines from the sandwich plate.

Unbolt oil lines

Remove the three 12 mm bolts that hold the oil cooler brackets to the car.

Remove oil cooler

Install the oil lines to the cooler. Remember: the line with a 45-degree end connects to the bottom.

Install the oil lines to the cooler

Install the oil cooler into the vehicle using four 12 mm bolts.

Install oil cooler into vehicle

Install the oil line fittings to the sandwich plate. First connect the fittings to the sandwich plate, and then connect them to the oil lines.

Install line fittings to sandwich plate

Thread oil lines to fittings

Tighten down all the connections using a 1 in. wrench.

Tighten down connections

Once connections are tightened, reinstall the oil filter.

Reinstall oil filter

Place the front bumper in the correct position.

Reinstall front bumper

Reinstall the two 10 mm bolts and two pop clips that hold the front bumper to the upper radiator support.

Reconnect front bumper to upper radiator support

Reinstall the four pop clips above the front grille.

Reinstall pop clips

Reinstall the two 10 mm bolts hidden behind the covers on the front of the bumper. These covers are located just above the fog light housings.

Reinstall hardware to front of bumper

Reinstall the sides of the bumper, making sure it pops into place.

Reinstall sides of bumper

Reinstall the two pop clips and one 10 mm bolt that connect the fender well splash guard to the bumper, on each side of the car.

Related Videos