How to Install the Fisbhone Offroad Tackle Rack
Best Parts, Inc. SAE and Metric Ratchet and Socket Set
Best Parts, Inc. SAE and Metric Ratchet and Socket Set 40 Piece
Shop for Best Parts, Inc. SAE and Metric Ratchet and Socket Set 40 Piece with confidence at AutoZone.com. Parts are just part of what we do. Get yours online today and pick up in store.BUY NOW
Measure and cut the included foam padding
Prior to installation, measure and cut the included foam padding so that it covers any vehicle contact points or where you feel it's needed.
Place arches onto the bed
Begin placing the arches onto the bed. The 2 arches with the larger brackets belong on the outside. The arch with a signature plate (in the center) faces the rear. Spacing is determined by the support-brace connections.
Install the 2 thinner support braces
Start installing the 2 thinner support braces. Using 6 of the 30mm bolts, washers, and nuts, loosely secure them on top of the arches in your desired location.
Install the larger braces
Loosely install the larger braces onto the sides of the arches, again using 6 bolt sets.
Slide the braces into place
Slide the braces around to your liking. Tighten down using a 19mm socket.
Secure the rack down
Begin securing the rack to the bed by inserting 2 15mm bolts into the channel bracket. Rotate it behind the arch bracket and push it high up against the plastic. With a 19mm socket, tighten down a nut and washer while ensuring it clamps onto the bed. Repeat for all brackets.
Install accessory mounts
Using the 4 16mm bolts, washers, and nuts, secure the hardware into the accessory mounts for future use.